Steel Frame Homes in France: Standards & Guide | Passive Steel Homes
RE2020 addresses new-building energy performance, life-cycle carbon and summer comfort.
Project Checklist for France
Applicable Energy Standards & Certifications for France
Statutory building codes, government subsidy benchmarks, and voluntary green building certifications applicable in France:
RE2020
France’s new-building regulation addresses energy, life-cycle carbon and summer comfort. Applicable requirements depend on project scope and timing.
Passive House / Passivhaus
A voluntary whole-building performance and certification route. Product certification and building certification have different scopes.
nZEB and Zero-Emission Buildings
Nearly zero-energy and zero-emission buildings are different concepts. The EU transition includes 2028 for new publicly owned buildings and 2030 for all new buildings, subject to national implementation.
BREEAM
A multi-criteria sustainability assessment family. The suitable current scheme depends on the country and residential project type.
Division of Responsibilities on Site
SerVilla Scope
Structural CFS framing production, building envelope insulation and weather barrier layers, assembly engineering, site supervision and logistics coordination.
Local Professional Scope
Building permit application, local planning approval, geotechnical survey and foundation slab execution, plus final local energy certification.
Climate Zone & Envelope Engineering for France
Engineered to withstand 50°C annual swings (-20°C winter to +35°C summer) and seismic actions with high-ductility S350GD framing and continuous rockwool envelope.
U-Value & Performance Benchmarks for France
RE2020 Environmental & Energy RegulationTarget thermal transmittance values for cold-formed steel envelopes adapted to statutory benchmarks in France:
| Building Element | Statutory Baseline | SerVilla Target |
|---|---|---|
| Exterior Wall | U ≤ 0.18 – 0.24 W/m²K | U ≤ 0.11 – 0.14 W/m²K |
| Roof / Attic | U ≤ 0.14 – 0.20 W/m²K | U ≤ 0.08 – 0.12 W/m²K |
| Windows & Doors | Uw ≤ 1.00 – 1.30 W/m²K | Uw ≤ 0.75 – 0.85 W/m²K (Triple Glazed) |
| Airtightness | n50 ≤ 1.5 – 3.0 h⁻¹ | n50 ≤ 0.60 h⁻¹ |
| Ventilation | Natural or Mechanical Exhaust | ≥ 85% Heat Recovery MVHR |
Logistics, Customs & Site Timeline for France
Factory-to-Site DispatchEurocode Structural Engineering, Snow, Wind & Seismic Safety in France
EN 1993 • EN 1998 • EN 1991SerVilla cold-formed steel frames are engineered specifically for France in full accordance with Eurocode 3 (EN 1993-1-3), Eurocode 1 (site-specific snow & wind action maps), and Eurocode 8 (earthquake resilience). Fully verified calculation dossiers and 3D IFC models are supplied for local building control approval.
Energy Efficiency Grants & Subsidies in France
High-performance steel envelopes qualify for low-carbon grants and subsidized green mortgage schemes:
Wall U-values down to 0.11 W/m²K cut primary energy demand by 50-70% below statutory baseline caps.
Access preferential interest rates from European mortgage lenders for A+ EPC certified envelopes.
Fully aligned with EU Taxonomy circular economy directives with zero on-site construction waste.
Featured Architectural Models for France
Three architectural concepts specifically engineered for France climate zone, statutory snow/wind actions (EN 1991) and envelope performance:
Other European Delivery Markets & Country Guides
SerVilla exports precision passive steel homes across the EU and EFTA jurisdictions:
Official Code Sources
- https://www.ecologie.gouv.fr/politiques-publiques/reglementation-environnementale-re2020
Explore Other Model Concepts
Compare alternative footprints, storey options and spatial arrangements.
Model 25-1003 • 99 m²
Model 25-1003 — 99 m², 1 storey
Model 25-1004 • 114 m²
Model 25-1004 — 114 m², 1 storey
Model 25-1005 • 135 m²
Model 25-1005 — 135 m², 1 storey
Frequently Asked Questions
Essential answers regarding steel construction, energy targets and project delivery.
Each country has specific energy performance regulations (e.g. GEG in Germany, RE2020 in France, Part L in Ireland). We design our steel envelope to comply with your local code requirements.
Statutory permits, local planning submissions, and national structural certification must be signed by a registered local architect or engineer in your jurisdiction.
Steel frame kits and building materials are packed into shipping containers or trucks. Transport and customs clearance terms (Incoterms like DAP or CIF) are detailed in each quote.
Yes. We offer experienced erection supervisors who oversee local assembly teams to ensure structural alignment and airtight envelope execution.
Yes. For Scandinavian and Alpine regions, wall insulation thicknesses can be increased up to 300-400mm with U-values down to 0.10 W/m²K.
Request a Project Quote
Prepare your project brief and connect directly with the SerVilla engineering team via WhatsApp.